Memmert 100% AtomSafe.

Fine glass and stainless steel. The elegant display has characterised Memmert lab ovens for many years now. With the newest generation of appliances it has become intelligent and interactive. Meet the Memmert ControlCOCKPIT!

It has never been easier to operate a lab oven

All adjustable parameters such as temperature (either Celsius or Fahrenheit), relative humidity, fan speed or exhaust air flap position can be set up in three quick steps without getting lost in a complicated menu. During operation all status messages, the current status of heating, ventilation and air flap position as well as time and alarm signals are visible simultaneously.

Intuitive operation of a Memmert oven or incubator

csm_reason-1-control-cockpit_4958229abb.jpg

  1. ControlCOCKPIT with touch function available in two model variants: SingleDISPLAY and TwinDISPLAY.
  2. Touch, turn & go. Quick setup in three steps. Never before, a temperature control appliance has been easier to operate.
  3. Models with TwinDISPLAY additionally feature setting of device specific parameters and temperature monitoring, graphical display of the program sequence and activation of the optional interior lighting in the right display.
  4. Versatile menu functions such as language settings, time zones and daylight saving time as well as the choice between Celsius and Fahrenheit.

For many years, structured stainless steel has been the unmistakable feature of Memmert ovens, incubators and climate chambers in the laboratory. Functional design in its most elegant form: scratch-resistant, hygienic, robust and durable.

Wherever Memmert ovens and heating baths are used, the superiority of high-quality stainless steel can be seen compared to coated sheet steel, which can corrode very quickly when in constant use.
For the outer housing of all Memmert appliances, structured stainless steel is used (rear walls are made of galvanised steel sheets); and for the inner chamber and sliding shelves as well as for housing, interior basin and accessories for every heating bath, stainless steel of class W-St. 1.4301 (ASTM 304) is used. Since aggressive substances are frequently used in the vacuum drying oven, the inner chamber and thermoshelves are made of stainless steel W-St. 1.4404 (ASTM 316L), and the tubing is made of stainless steel W-St. 1.4571 (ASTM 316i).

csm_reason-2-stainless-steel_dd9a43d5fd.jpg

Stainless steel is the ideal material for temperature control chambers and heating baths. It is particularly corrosion-resistant, hygienic, robust and can be recycled without any problems.

 

We think that the programming of a lab oven should be possible from anywhere in the world without problems. For this reason, Memmert devices feature state-of-the-art communication interfaces.

USB port on the ControlCOCKPIT plus ethernet connectioncsm_USB_eng_07_acbacc62e8.jpg

An ethernet connection for reading out logs is standard for all new generation Memmert lab ovens. For appliances with TwinDISPLAY the ethernet connection can additionally be used for uploading and setting up profiles from the software AtmoCONTROL as well as for online logging. Appliances with TwinDISPLAY offer a USB port on the ControlCOCKPIT for the direct upload of programmes, for reading out logs or protecting appliances with individual user-ID function. By the way: the individual allocation of IP addresses is possible directly via ControlCOCKPIT.

Interface for programming and log function

All Memmert lab ovens feature an electronic temperature monitoring system, a mechanical temperature limiter acc. to DIN 12880 and an integrated auto-diagnostic system with optical and acoustic alarm as a standard.

Even more safety in TwinDISPLAY models

TwinDISPLAY appliances are equipped with an overtemperature monitor as well as two high-grade platinum temperature sensors Pt100 for mutual monitoring and operation transfer at same working temperature in case of an error. Particularly in ramp operation, the integrated temperature monitoring system AutoSAFETY can be activated to automatically follow the set temperature with a freely selectable tolerance. Individual MIN-/MAX-values can be set for over/undertemperature as well as for all other parameters like relative humidity, CO2, O2 and pressure (vacuum).

With the AtmoCONTROL software, alarm notifications can be sent out to an e-mail address. The optional MobileALERT makes it possible to send the alarm notifications by SMS to a mobile phone.

 

 

Please don’t hesitate to contact us

If you have questions concerning applications, appliances or quotations please call a member of our team on :

Tel : 01 - 4552201
Email : customerservice(at)lennox.ie

lennox.ie uses cookies to provide you with the best experience on our website. By continuing to view our website without changing your cookie settings you will receive all cookies from our site.